The Kramer wheel loader KL36.8 with a bucket brush.

Wheel loaders KL36.8 - COMFORTABLE AND EFFICIENCT APPLICATION

The KL36.8 wheel loader of the Premium 8 Series range by Kramer sets new standards in terms of efficiency, performance and comfort. The efficient drive system and the four operating modes (Power, Eco, Road, CSD) enable the individual operational settings in all work situations. As a result, the application can be performed as best is possible in the most cost-effective and efficient manner. With this machine, the one-piece frame also provides a high level of stability and great maneuverability.

Wheel loaders KL36.8

Benefits at a glance

  • Fuel savings: The correct selection of the four driving modes (Power, Eco, Road, CSD) can save up to 10% fuel
  • Automatic load stabilizer: The dampening of vibrations in the lifting frame ensures a high degree of operational comfort
  • ecospeed transmission: The optional ecospeed transmission enables continuous acceleration from 0 km/h to 40 km/h
  • Smart Attach: The fully-hydraulic quickhitch plate, installed as standard, makes it possible to comfortably hitch up hydraulic attachments without needing to exit the machine
  • Comfortable cabin: With entry on both sides, as well as extensive glazing for the best 360° visibility

Highlights

Assistance systems

  • The vehicle is equipped with various assistance systems
  • Simple and convenient operation, even for inexperienced drivers
  • Examples: Angle indicator for attachments in the display, bucket and loader feedback
The assistance systems of the 8 series from Kramer.

Operating modes

  • The operator can select between different operating modes: Power, Eco, Road, and CSD (Constant speed drive)
  • The right driving setting can be selected for any application by simply pressing a button
  • Maximum economic efficiency with up to 10% fuel saving combined with maximum operator comfort with effective noise reduction
The operating modes of the 8 series from Kramer.

Smart Attach (fully hydraulic quickhitch system)

  • Coupling of hydraulically driven attachments with the automatic connection of the hydraulic circuit, without the need to get out and in
  • Increased productivity as a result of cost and time savings
  • Attachments changed within seconds for full flexibility
Smart Attach of the 8 series from Kramer.

Entry and exit from both sides

  • Increased safety thanks to entry and exit on the side facing away from traffic
  • Increased flexibility thanks to access from both sides
The cabin entry on both sides of the 8 series from Kramer.

7" LCD display

  • All relevant machine data at a glance summarised on the display
  • Operating and setting the machine’s parameters easily and intuitively using the jog dial
  • Safe jog dial operation possible, even when driving
The 7-inch LCD display of the 8 series from Kramer.

Further Highlights

The all-wheel steering of the 8 series from Kramer.

All-wheel steering

  • High stability even at full steering lock thanks to the undivided frame
  • Maximum maneuverability thanks to steering angles of up to 40° on both the front and rear axles
  • Consistent payload independent of the steering angle for constant leverage ratios
The one piece vehicle frame of the 8 series from Kramer.

One-piece vehicle frame

  • High stability, even on rough terrain
  • Constant payload due to the constant leverage ratios. Independent of the steering angle, the payload always remains the same
  • Great maneuverability due to the high steering angle. Therefore, some steering movements are superfluous, and travel and cycle times are reduced
The dual circuit pneumatic brake system of the 8 series from Kramer.

Two-circuit pneumatic brake system

  • Pneumatic braked trailers can be towed on the road
  • Enables use of the vehicle’s maximum approved trailer load
The colour labelled switches of the 8 series from Kramer.

Color-coded switches

  • Uniformed color scheme for hydraulic, electric, driving, and safety features
  • Increased safety due to minimized danger of mixing up switches
  • Operating concept that reaches across all models to simplify the handling of the fleet
The front wheel steering of the 8 Series from Kramer.

Front axle steering

  • Safe and familiar road travel at high speed
  • Precise guidance of special attachments
  • Easy maneuvering in trailer mode
The 8 series from Kramer has an EC tractor approval.

EC tractor approval

  • Application as a towing vehicle for trailer transport with material
  • No restrictions regarding the loads alongside the separate attachments
  • It is possible to travel on the road with an attachment subject to the legal provisions
The crab steering of the 8 series from Kramer.

Crab steering

  • Easy maneuvering in confined spaces
  • Gentle driving on sensitive surfaces
  • Simple control in combination with special attachments
The dual circuit hydraulic brake system of the Kramer wheel loaders and telescopic wheel loaders of the 8 series.

Hydraulic two-circuit trailer brake

  • Hydraulic braked trailers can be towed on the road
  • Even older trailers with a hydraulic one-circuit brake can be used (downwardly compatible)
  • Enables use of the vehicle’s maximum approved trailer load
The panoramic cabin of the 8 series from Kramer.

Panoramic cabin

  • Everything in view - A panoramic front windshield far to the rear with narrow cabin pillars ensure for an optimal view of the attachment at any time with an extended view upwards
  • The operator also has a particularly good view of the attachment, even with a maximum stacking height
  • High degree of work quality and safety as the work area can be optimally viewed
The low speed control and the manual throttle of the 8 series from Kramer.

Low-speed device and hand throttle

  • Easy operation of attachments that are operated with a constant rpm and a simultaneously low travel speed
  • Engine rpm and travel speed can be set individually
  • Maximum productivity and a best-possible work result, even on long working days
The 8 series from Kramer has an engine stop automatic.

Auto-stop

  • Automatic switch-off of the diesel engine after a preset time
  • Saving of fuel and reduction of CO2 emissions
  • Protection of the environment and machine components
Ecospeed of the 8 series from Kramer.

ecospeed: Variable hydrostatic overdrive transmission

  • Variable acceleration without interruption to the tractive force or gear-shifting from 0 km/h to 40 km/h
  • Full pushing power and tractive force in all work situations
  • Maximum efficiency and low fuel consumption as a result of the optimal interplay between the engine and drive train
Die Zahnradpumpe LUDV der Teleskopradlader der 8er-Serie von Kramer.

Gear pump with LUDV

  • Load-independent flow distribution with load-sensing characteristics
  • It is possible to operate several hydraulic functions at once
  • Fast loading cycles and more efficient motion processes increase productivity
The easy maintenance access of the 8 series from Kramer.

Easy maintenance access

  • Easy access to the engine compartment thanks to the wide-opening hood
  • Optimum accessibility of all important components for checking fill levels
  • Quick implementation of service work thanks to vertically mounted filters and additional maintenance openings
The central lubrication unit of the 8 series from Kramer.

Automatic central lubrication system

  • Longer service life and value retention of the machine thanks to automatic lubrication of all lubrication points
  • Time and cost savings thanks to low and bundled maintenance of the centralized lubrication system
  • Optimum lubrication thanks to adjustable time intervals and grease quantities
The automatic bucket return of the 8 series from Kramer.

Automatic bucket return

  • The automatic bucket return is ideal for loading work that repeatedly necessitates a particular bucket position
  • The desired position can be individually set and stored
  • Safe and fatigue-free working as a result of the automatic motion processes. The charge cycles are becoming clearly more efficient
Smart Steering of the 8 series from Kramer.

Smart Steering

  • Speed-independent steering support.
  • The required rotations of the steering wheel at low travel speeds are significantly reduced. Greater steering angle per steering wheel rotation.
  • Fast turning maneuvers and reduced effort increase productivity and enable quick maneuvering.
Two-layer coating of the axles of the 8 series from Kramer.

Two-layer paintwork on the axles

  • Excellent protection against corrosion
  • The axles are clearly more robust and durable
  • Please note that the product range may vary depending on the country.

  • The technical data of the products may vary accordingly with the selection of different options.

Downloads

Brochure The wheel loaders and telescopic wheel loaders KL36.8, KL38.8, KL41.8, KL43.8, KL33.8T, KL37.8T

Download

Brochure Produktübersicht Product Overview

Download