Telehandler 3106

3106

Dealer search Product inquiry

Cab

ROPS/FOPS tested, sound proofed, low-vibration, comfortable cabin with 360-degree all-round visibility and colored full-glazing.
Windshield wipers in front and rear, with intermittent wipers in front, indicator reset
Indicator for interior cab lighting, door divided, upper door section adjustable to two positions by 180°
Solid panoramic front windshield without a transversal spar for optimal visibility
Rear window can be opened
Hanging pedals and removable floor mats
Mechanically-sprung comfort operator’s seat Grammer MSG85/721
Electronically pilot-operated multifunctional joystick with integrated travel direction selector and telescopic function
Color-coded switches for hydraulic, electric, driving, and safety features
Heater with 3-speed fan, 4 air vent and defroster nozzles
12 V socket
Bottle holder, sun blind, storage compartment under the operator's seat, clothing hook
Work lights 1x LED Basic on front (1000 lm), work light 1x LED Basic on rear (1000 lm)
Lighting according- road traffic regulations

Steering and work hydraulics

Gear pump with load pressure independent flow distribution (LUDV)
4 steering modes incl. electric changeover and automatic synchronization as standard
3. Control circuit and telescopic function with proportional control
Permanent function 3. Control circuit can be switched on via keypad
Overload and "Smart Handling" driver assistance system (manual mode, bucket and stacking mode)

Engine

Coarse-mesh, horizontal combination cooler for engine water, hydraulic oil and charge air
Reversible fan incl. automatic function
Cyclone air filter with integrated safety cartridge and pre-separator
Manual battery disconnect switch

Drive system and axles

Stepless, hydrostatic transmission with load-dependent, electronic transmission control
Maximum speed 40 km/h
Temporary reversing warning device
Mechanical parking brake

Vehicle design and kinematics

Torsion-resistant steel frame in box profile design
Telescopic arm guided by 13 sliding elements, adjustable from outside
End position damping in the telescopic cylinder

Documentation

Operator's manual, service manual

Operator's cab & Cabine

Cab window right and rear, heated with automatic shut-off
Air-conditioning system
Interior mirror, including bracket for cell phone (CCA_PHONHOLD_002)
Mechanically sprung operator's seat with fabric cover (MSG85/721) - (standard)
Air-sprung operator’s seat (MSG95AL/722)
Adjustable steering column (height and incline)
Radio-ready (antenna, speaker)
Radio system DAB+ with BT + hands-free installation (radio, antenna, speaker)
7” inch display (incl. oil volume adjustment, sensitivity of the joystick)
Rear-view camera
- only in association with
  - Display 7 inch inc. Oil volume adjustment and sensitivity of the loading system
Front view camera right side

Lighting

(Orange) LED rotating beacon
LED Basic work light (1000 Lumen)- 1x additional unit on front, 1x unit on rear
LED Basic lighting package (1000 Lumen) - 7 additional work lights - 1x front, 1x rear, 1x left, 2x right, 2x outer arm
2x LED Basic work light (1000 Lumen) on side of telescopic arm (outer pipe)
Additional lighting LED Basic rear (1000 Lumen)

Approval, road traffic

Data confirmation (ABE) for self-propelled work machine* - (standard)
EC certificate of conformity for tractors (167/2013/EC - Class T1), without data confirmation
EC certificate of conformity for tractors (167/2013/EC - Class T1), with data confirmation - only for Germany

*Germany, Luxembourg, Netherlands, Austria, Slovakia, the Czech Republic, Switzerland, Estonia, Latvia, Lithuania, Hungary

Drive system and axles

Four type of steering - (standard)
Hydrostatic 20 km/h
Hydrostatic 30 km/h
Hydrostatic 40 km/h - (standard)
Hydrostatic 40 km/h incl. reduction in rpm Smart Driving
Driving mode Power, Eco - (standard)
Driving mode Power-, Eco,- Pedal-/CSD
- includes:
  - Low-speed device and hand throttle
Preliminary vacuum filter
Cyclone pre-filter
Cyclone pre-filter Turbo III
Reverse fans incl. automatic function
100% differential lock in the front axle - connectible
Pre-heating of coolant, fuel, hydraulic oil
Automatic stop (Engine off through seat contact switch)

Tires

Mitas 340/80-20 MPT-01 - Traction profile - ET10
Mitas 405/70-20 MPT 01 - Traction profile - ET35
Mitas 405/70-24 MPT 01 - Traction profile - ET50
Michelin 400/70 R20 XMCL - Traction profile - ET50
Michelin 400/70 R24 XMCL - Traction profile - ET50
Mitas 340/80-20 (12.5-20) MPT-04 - Construction machine profile - ET10
Michelin 400/70R20 BIBLOAD - Multi-purpose profile - ET50
Firestone 400/70 R20 Duraforce Utility - Multi-purpose profile - ET50
Alliance 400/70 R20 Multiuse 550 - Municipal profile - ET50
Trelleborg 400/70R20 TH400 ET+50
Trelleborg 400/70R20 TH500 ET+50
Trelleborg 400/70R24 TH400 ET+50
Trelleborg 400/70R24 TH500 ET+50

Loading system & Quick change plates

Load stabilizer (vibration damper) incl. automatic function
Automatic bucket return (ABR), including vibration function of the tipping cylinder
Tipping cylinder lock
Telescopic arm dirt wiper
Mechanical quick coupler system, Kramer System (Telescopic “small” - pivoting angle 132°) - (standard)
- Not with:
  - Pressure release of 3rd control circuit
Hydraulic quick coupler system, Kramer System (Telescopic “small” - pivoting angle 132°)
Hydraulic quick coupler system, Kramer System (Telescopic “small” - pivoting angle 150°)
Fully hydraulic quick coupler system “Smart Attach”, Kramer System (Telescope “small” - pivoting angle 150°)
- only in association with
  - Pressure release of 3rd control circuit
Hydraulic quick coupler system, Weidemann System (pivoting angle 150°)
Hydraulic quick coupler system, EURO System (pivoting angle 150°)
Hydraulic quick coupler system, Manitou System (pivoting angle 150°)
Hydraulic quick coupler system, Matbro / John Deere System (pivoting angle 150°)

Hydraulics

Filling of the hydraulic system with environmentally-friendly hydraulic oil PANOLIN Synt46
Oil volume adjustment for hydraulic additional control circuits
- included in:
  - Display 7 inch (incl. oil volume adjustment and sensitivity of the loading system)
Pressure release of 3rd control circuit
Unpressurized return line, on the outer arm, incl. overflow oil line
Reversing valve in front on 3rd control circuit
Tipper connection
Three-point lifting unit, category II
Rear power take-off 540 rpm
- only in association with
  - Three-point lifting unit, category II
  - Automatic attachment coupling 38 mm - fixed to frame
Control circuit, rear attachment, double-acting
- only in association with
  - Tipper connection

Electrical system

Plug receptacle for front attachments, 7-pole
Outlet for rear attachments, 7-pole

Safety options

Temporary reversing warning sound - (standard)
Reverse alarm (acoustic)
Drive train cover
Underbody protection
- only in association with
  - Drive train cover
Immobilizer system, integrated in the ignition switch key
Fire extinguisher (2 kg)
Protective grating for front windshield, removable (not approved for machine travel on public roads)
- not in conjunction with:
  - Red/white warning stripes (in accordance with DIN 30710)
Red/white warning stripes (in accordance with DIN 30710)
- Not with:
  - Protective grating for front windshield, removable (not approved for machine travel on public roads)
Seatbelt alarm
CESAR DataTag ID - Only for countries that use this system within their legal institutions, such as Great Britain

Other

Single-color RAL customized paint finish (gray parts not included)*
Protective measures for use in aggressive materials (salt and fertilizer use)
- only in association with
  - Dry lubrication (smooth paint) Telescopic arm
  - Telescopic arm dirt wiper
  - Cover for the drive train
Dry lubrication (smooth paint) Telescopic arm (not for AUS/NZ)
(Fully automatic) central lubrication unit
Central lubrication system (aggressive media)
- only in association with
  - Protective measures for use in aggressive materials (salt and fertilizer use)
  - Dry lubrication (smooth paint) Telescopic arm (not for AUS/NZ)
  - Telescopic arm dirt wiper
  - Cover for the drive train
Re-configured central lubrication system (lubrication line positioned in the arm)
EquipCare Dual ID
Dynamic weighing system
- only in association with
  - Load stabilizer (vibration damper) incl. automatic function
  - 7” inch display (incl. oil volume adjustment, sensitivity of the joystick)
  - In addition, one of the following quick hitch systems must be selected:
    - Kramer hydraulic 150°, Kramer Smart Attach 150°, EURO
    - Recommended: only in combination with central lubrication system!

*We reserve the right to decline paint finishes that exhibit similarities to protected colors or color combinations of other manufacturers!

Ball hitches

Automatic attachment coupling 38 mm - fixed to frame
Towing hitch
Auto hitch attachment coupling (incl. Hydraulic control and tipper connection)
Mechanical attachment coupling 32 mm - fixed to frame
Bearing block for attachment couplings, height-adjustable (application for attachment coupling, height-adjustment required)
Automatic 38 mm attachment coupling application for bearing block, height-adjustable
Ball head coupling (K50) application for bearing block, height-adjustable, extended
Mechanical attachment coupling application for bearing block, height-adjustable - 32 mm
Automatic attachment coupling application for bearing block, height-adjustable - 32 mm
Piton-Fix application for bearing block, height-adjustable
Mirror for attachment coupling
Hydraulic trailer brake valve (2-line system)

Extended warranties

Security 24 (2000 h)
Security 36 (3000 h)
Security 48 (4000 h)
Security 60 (5000 h)

Please note that the product range may vary depending on the country.
The technical data of the products may vary accordingly with the selection of different options.
The engines shown may differ from the current delivery range in your country. Special equipment is depicted here that may be subject to extra charge. Subject to change without notice.

Contact

Get in touch

Find a Dealer