Telehandler KT276

KT276

Dealer search Product inquiry

Cab

ROPS/FOPS tested, sound proofed, low-vibration, comfortable cabin with 360-degree all-round visibility and colored full-glazing.
Solid windshield without a transversal spar for optimal visibility
Rear window can be opened
Left side window can be opened in two positions
Multi-function joystick with an integrated travel direction selector with night design (up to 13 functions)
Windshield wipers in front and rear, left/right exterior mirrors, door switch for interior cab lighting, sun blind, coat hook
Color-coded switch for hydraulic, electric, driving, and safety features
Heater with 3-speed fan, 4 air vents and defroster nozzles, plus a dust filter
Mechanically-suspended comfort seat Grammer MSG85/721
12 V socket
Shelves and storage compartments
Bottle holder
1 halogen working light in front, 1 halogen working light in rear
Lighting according to road traffic regulations (StVZO)
Suspended pedals and removable floor mat for fast cleaning

Steering and work hydraulics

Gear pump with load-pressure-independent flow distribution (LUDV system)
3rd control circuit and telescoping function with proportional control
Overload warning indicator
Continuous function for 3rd control circuit connectable via keypad
Overload and operator assistance system “Smart Handling” (manual mode, bucket and stacking mode)

Engine

Coarse meshed combination radiator for engine water, hydraulic oil
Cyclone-air filter with integrated safety cartridge and pre-filter
Battery disconnector switch
4 years or 4,000 operating hours warranty on the engine

Drive system and axles

Continuous, hydrostatic axial piston transmission with load-dependent, electronic transmission control for maximum thrust and tractive force
Tractive force
Temporary reversing alarm
Mechanical parking brake, acting on both axles
Steering mudguards on all wheels

Vehicle design and kinematics

Torsion-resistant steel frame in box profile design
Telescopic arm guided by 13 sliding elements, adjustable from outside
End position damping in the telescopic cylinder

Documentation

Operator's manual, service manual

Cab

Rotating beacon (yellow)
Raised cabin for optimized all-round visibility (+120 mm)
Work light, 1 additional unit in front, 1 additional unit in rear
LED work lights, 2 pieces in front, 2 pieces in the rear - omission of series work lights
2 work lights on the side of the telescopic arm (outer pipe)
2 LED work lights on the side of telescopic arm (outer pipe)
Air-suspended operator's seat (MSG95AL/722)
Adjustable steering column
Air-conditioning system
Radio-ready (antenna, speaker)
Radio system (radio, antenna, speakers)
Interior mirror, including bracket for cell phone
Rearview camera
Seat back extension for standard driver's seat
Cab window right and rear, heated with automatic shut-off
Front view camera right side
Front view camera right side, including rear-view camera

Drive system

100 % differential lock
Low-speed device and hand throttle
Hydrostat 30 km/h
- only in association with
  - License plate illumination, including license plate bracket in front
- Recommended:
  - Load stabilizer (vibration damper)

Equipment for road traffic

License plate illumination, including license plate bracket in front
Data confirmation (ABE) for self-propelled working machine (standard) *

Additionally, a trailer hitch must be selected

* Germany, Luxembourg, Netherlands, Austria, Slovakia, Czech Republic, Switzerland, Estonia, Latvia, Lithuania

Ball hitches

EC certificate of conformity tractor (167/2013/EC -class T1) is not available for this type!

The rear socket as well as a mirror for the ball hitch and or a rear view camera must always be selected in connection with the ball hitch

Towing hitch
Automatic trailer hitch 38 mm - fixed to frame
Trailer hitch 32 mm - fixed to frame
Bearing block for ball hitches, height adjustable (insert for height adjustable ball hitch required)
Insert for automatic trailer hitch for trailer hitch block, height adjustable - 38 mm
Insert ball hitch, mechanical, for trailer hitch block, height adjustable - 32 mm
Insert trailer hitch self-acting for hitch block height adjustable - 32 mm
Insert ball head K50 for trailer hitch block, height adjustable, only suitable for height adjustable drawbars
Insert ball hitch (K50) for hitch block height adjustable, extended
Auto Hitch ball hitch (incl. hydr. control)
- only in association with
  - Oil volume adjustment for hydraulic additional control circuits
Mirrors for trailer hitch (Not in conjunction with rear view camera)
Hydraulic trailer brake valve
Auto Hitch ball hitch (incl. hydr. control) and tipper connection
- only in association with
  - Outlet for rear attachments, 7-pole
  - Oil volume adjustment for hydraulic additional control circuits
Auto Hitch ball hitch (incl. hydr. control) and double-acting hydraulic connection at the rear including tipper connection
- only in association with
  - Outlet for rear attachments, 7-pole
  - Oil volume adjustment for hydraulic additional control circuits

Engine

Vacuum pre-filter
Reverse fan
Pre-heating engine, fuel, hydraulic oil (230V)

Loading system & Quick change plates

Load stabilizer (vibration damper)
Hydraulic quickhitch facility, Kramer system (telescope "small" - swivel angle 132°)
Hydraulic quickhitch facility, Kramer system (telescope "small" - swivel angle 150°)
Mechanical quickhitch facility, Weidemann system (swivel angle 150°)
Hydraulic quickhitch facility, Weidemann system (swivel angle 150°)
Hydraulic quickhitch facility, EURO system (swivel angle 150°)
Hydraulic quickhitch facility, Manitou system (swivel angle 150°)
Hydraulic quickhitch facility, Matbro / John Deere system (swivel angle 150°)
Hydraulic quick-hitch plate, SkidSteer (swivel angle 150°)
- only in association with
  - Socket for front attachments, 14-pin (only with Skid-Steer quickhitch facility)
Quick-change plate Kramer mechanical (swivel angle 150°)

Hydraulics

Pressure release of 3rd control circuit
Hydraulically activated control circuit in front (electronic switch-over)
Automatic bucket return
Tipping cylinder lock
Tipper connection
- only in association with
  - Outlet for rear attachments, 7-pole
  - Oil volume adjustment for hydraulic additional control circuits
Oil volume adjustment for hydraulic additional control circuits
Rear-mounted control circuit, double-acting
- only in association with
  - Outlet for rear attachments, 7-pole
  - Oil volume adjustment for hydraulic additional control circuits
Double-acting hydraulic connection at the rear including tipper connection
- only in association with
  - Outlet for rear attachments, 7-pole
  - Oil volume adjustment for hydraulic additional control circuits
Freeflow return line, on the outer arm - incl. leakage oil line
Filling of the hydraulic system with environmentally friendly hydraulic oil PANOLIN Synt46

Electrical system

Plug receptacle for front attachments, 7-pole
Outlet for rear attachments, 7-pole
Socket for front attachments, 14-pin (only with Skid-Steer quickhitch facility)

Safety options

Reversing alarm (acoustic)
Protective grille front windshield, removable (not approved for public road traffic!)
Underbody protection
- only in association with
  - Power train cover
Fire extinguisher (2 kg)
Dirt wipers, telescopic arm
Power train cover
Red/white warning stripes (in accordance with DIN 30710)
Tire blow-out protection
Protective measures for use in aggressive materials (salt and fertilizer use)
- only in association with
  - Telescopic arm smooth paint
  - Dirt wipers, telescopic arm
Telescopic arm smooth paint
Immobilizer system, integrated in the ignition switch key

Other

Special painting in one color according to RAL (gray parts are not included)*
Preparation of central lubrication system (lubrication line set in arm)
(Fully automatic) central lubrication unit
Central lubrication system (aggressive media)
- only in association with
  - Protective measures for use in aggressive materials (salt and fertilizer use)
  - Telescopic arm smooth paint
  - Dirt wipers, telescopic arm
Hydraulic three-point receptacle in the rear
- only in association with
  - Mirror for ball hitch (not in combination with M_KABAUS_053 rear view camera)
- not with:
  - Bearing block for ball hitches, height adjustable (insert for height adjustable ball hitch required)
  - Auto Hitch ball hitch (incl. hydr. control)
Power take-off, 540 rpm1/min
- only in association with
  - Hydraulic three-point receptacle in the rear

* We reserve the right to reject paintwork which has similarities to protected colors or color combinations from other manufacturers!