The Kramer KT316 telehandler during loading.

KT316

Dealer search Product inquiry

Standard components

  • ROPS/FOPS tested, sound proofed, low-vibration, comfortable cabin with 360-degree all-round visibility and colored full-glazing.
  • Windshield wipers in front and rear, with intermittent wipers in front, indicator reset
  • Indicator for interior cab lighting, door divided, upper door section adjustable to two positions by 180°
  • Solid panoramic front windshield without a transversal spar for optimal visibility
  • Rear window can be opened
  • Hanging pedals and removable floor mats
  • Mechanically-sprung comfort operator’s seat Grammer MSG85/721
  • Electronically pilot-operated multifunctional joystick with integrated travel direction selector and telescopic function
  • Color-coded switches for hydraulic, electric, driving, and safety features
  • Heater with 3-speed fan, 4 air vent and defroster nozzles
  • 12 V socket
  • Bottle holder, sun blind, storage compartment under the operator's seat, clothing hook
  • Work lights 1x LED Basic on front (1000 lm), work light 1x LED Basic on rear (1000 lm)
  • Lighting according- road traffic regulations
  • Gear pump with load pressure independent flow distribution (LUDV)
  • 4 steering modes incl. electric changeover and automatic synchronization as standard
  • 3. Control circuit and telescopic function with proportional control
  • Permanent function 3. Control circuit can be switched on via keypad
  • Overload and "Smart Handling" driver assistance system (manual mode, bucket and stacking mode)
  • Coarse-mesh, horizontal combination cooler for engine water, hydraulic oil and charge air
  • Reversible fan incl. automatic function
  • Cyclone air filter with integrated safety cartridge and pre-separator
  • Manual battery disconnect switch
  • Stepless, hydrostatic transmission with load-dependent, electronic transmission control
  • Maximum speed 40 km/h
  • Temporary reversing warning device
  • Mechanical parking brake
  • Torsion-resistant steel frame in box section design
  • Telescopic arm is guided by 13 externally adjustable sliding elements
  • End position damping in the telescopic cylinder
     
  • Operator's manual, service manual

Options

  • Cab window right and rear, heated with automatic shut-off
  • Air-conditioning system 
  • Interior mirror, including bracket for cell phone (CCA_PHONHOLD_002)
  • Mechanically sprung operator's seat with fabric cover (MSG85/721) - (standard)
  • Air-sprung operator’s seat (MSG95AL/722)
  • Adjustable steering column (height and incline)
  • Radio-ready (antenna, speaker)
  • Radio system DAB+ with BT + hands-free installation (radio, antenna, speaker)
  • 7” inch display (incl. oil volume adjustment, sensitivity of the joystick)
  • Rear-view camera 
    • only in association with
      • Display 7 inch inc. Oil volume adjustment and sensitivity of the loading system
  • Front view camera right side
  • (Orange) LED rotating beacon
  • LED Basic work light (1000 Lumen)- 1x additional unit on front, 1x unit on rear 
  • LED Basic lighting package (1000 Lumen) - 7 additional work lights - 1x front, 1x rear, 1x left, 2x right, 2x outer arm”
  • 2x LED Basic work light (1000 Lumen) on side of telescopic arm (outer pipe)
  • Additional lighting LED Basic rear (1000 Lumen)
  • Data confirmation (ABE) for self-propelled work machine*
  • EC certificate of conformity for tractors (167/2013/EC - Class T1), without data confirmation
  • EC certificate of conformity for tractors (167/2013/EC - Class T1), with data confirmation - only for Germany

*Germany, Luxembourg, Netherlands, Austria, Slovakia, the Czech Republic, Switzerland, Estonia, Latvia, Lithuania, Hungary
 
  • Four type of steering - (standard)
  • Hydrostatic 20 km/h
  • Hydrostatic 30 km/h
  • Hydrostatic 40 km/h - (standard)
  • Hydrostatic 40 km/h incl. reduction in rpm Smart Driving
  • Driving mode Power, Eco - (standard)
  • Driving mode Power-, Eco,- Pedal-/CSD
    • includes:
      • Low-speed device and hand throttle
  • Preliminary vacuum filter
  • Cyclone pre-filter
  • Cyclone pre-filter Turbo III
  • Reverse fans incl. automatic function
  • 100% differential lock in the front axle - connectible
  • Pre-heating of coolant, fuel, hydraulic oil
  • Automatic stop (Engine off through seat contact switch)
  • Mitas 340/80-20 MPT-01 - Traction profile - ET10
  • Mitas 405/70-20 MPT 01 - Traction profile - ET35
  • Mitas 405/70-24 MPT 01 - Traction profile - ET50
  • Michelin 400/70 R20 XMCL - Traction profile - ET50
  • Michelin 400/70 R24 XMCL - Traction profile - ET50
  • Mitas 340/80-20 (12.5-20) MPT-04 - Construction machine profile - ET10
  • Michelin 400/70R20 BIBLOAD - Multi-purpose profile - ET50
  • Firestone 400/70 R20 Duraforce Utility - Multi-purpose profile - ET50
  • Alliance 400/70 R20 Multiuse 550 - Municipal profile - ET50
  • Trelleborg 400/70R20 TH400 ET+50
  • Trelleborg 400/70R20 TH500 ET+50
  • Trelleborg 400/70R24 TH400 ET+50
  • Trelleborg 400/70R24 TH500 ET+50
  • Load stabilizer (vibration damper) incl. automatic function
  • Automatic bucket return (ABR), including vibration function of the tipping cylinder
  • Tipping cylinder lock
  • Telescopic arm dirt wiper
  • Mechanical quick coupler system, Kramer System (Telescopic “small” - pivoting angle 132°) - (standard)
    • Not with:
      • Pressure release of 3rd control circuit
  • Hydraulic quick coupler system, Kramer System (Telescopic “small” - pivoting angle 132°)
  • Hydraulic quick coupler system, Kramer System (Telescopic “small” - pivoting angle 150°)
  • Fully hydraulic quick coupler system “Smart Attach”, Kramer System (Telescope “small” - pivoting angle 150°)
    • only in association with
      • Pressure release of 3rd control circuit
  • Hydraulic quick coupler system, Weidemann System (pivoting angle 150°)
  • Hydraulic quick coupler system, EURO System (pivoting angle 150°)
  • Hydraulic quick coupler system, Manitou System (pivoting angle 150°)
  • Hydraulic quick coupler system, Matbro / John Deere System (pivoting angle 150°)
  • Filling of the hydraulic system with environmentally-friendly hydraulic oil PANOLIN Synt46
  • Oil volume adjustment for hydraulic additional control circuits
    • included in:
      • Display 7 inch (incl. oil volume adjustment and sensitivity of the loading system)
  • Pressure release of 3rd control circuit
  • Unpressurized return line, on the outer arm, incl. overflow oil line
  • Reversing valve in front on 3rd control circuit
  • Tipper connection
  • Three-point lifting unit, category II 
  • Rear power take-off 540 rpm
    • only in association with
      • Three-point lifting unit, category II 
      • Automatic attachment coupling 38 mm - fixed to frame
  • Control circuit, rear attachment, double-acting
    • only in association with
      • Tipper connection
  • Plug receptacle for front attachments, 7-pole
  • Outlet for rear attachments, 7-pole
  • Temporary reversing warning sound - (standard)
  • Reverse alarm (acoustic)
  • Drive train cover 
  • Underbody protection
    • only in association with
      • Drive train cover 
  • Immobilizer system, integrated in the ignition switch key
  • Fire extinguisher (2 kg)
  • Protective grating for front windshield, removable (not approved for machine travel on public roads)
    • not in conjunction with:
      • Red/white warning stripes (in accordance with DIN 30710)
  • Red/white warning stripes (in accordance with DIN 30710)
    • Not with:
      • Protective grating for front windshield, removable (not approved for machine travel on public roads)
  • Seatbelt alarm
  • CESAR DataTag ID - Only for countries that use this system within their legal institutions, such as Great Britain
  • Single-color RAL customized paint finish (gray parts not included)*
  • Protective measures for use in aggressive materials (salt and fertilizer use)
    • only in association with
      • Dry lubrication (smooth paint) Telescopic arm
      • Telescopic arm dirt wiper
      • Cover for the drive train
  • Dry lubrication (smooth paint) Telescopic arm (not for AUS/NZ)
  • (Fully automatic) central lubrication unit
  • Central lubrication system (aggressive media)
    • only in association with
      • Protective measures for use in aggressive materials (salt and fertilizer use)
      • Dry lubrication (smooth paint) Telescopic arm (not for AUS/NZ)
      • Telescopic arm dirt wiper
      • Cover for the drive train
  • Re-configured central lubrication system (lubrication line positioned in the arm)
  • EquipCare Dual ID
  • Dynamic weighing system
    • only in association with
      • Load stabilizer (vibration damper) incl. automatic function
      • 7” inch display (incl. oil volume adjustment, sensitivity of the joystick)
      • In addition, one of the following quick hitch systems must be selected:
        • Kramer hydraulic 150°, Kramer Smart Attach 150°, EURO
        • Recommended: only in combination with central lubrication system!”

*We reserve the right to decline paint finishes that exhibit similarities to protected colors or color combinations of other manufacturers!
 
  • Automatic attachment coupling 38 mm - fixed to frame
  • Towing hitch
  • Auto hitch attachment coupling (incl. Hydraulic control and tipper connection)
  • Mechanical attachment coupling 32 mm - fixed to frame
  • Bearing block for attachment couplings, height-adjustable (application for attachment coupling, height-adjustment required)
  • Automatic 38 mm attachment coupling application for bearing block, height-adjustable
  • Ball head coupling (K50) application for bearing block, height-adjustable, extended
  • Mechanical attachment coupling application for bearing block, height-adjustable - 32 mm
  • Automatic attachment coupling application for bearing block, height-adjustable - 32 mm
  • Piton-Fix application for bearing block, height-adjustable
  • Mirror for attachment coupling 
  • Hydraulic trailer brake valve (2-line system)
  • Security 24 (2000 h)
  • Security 36 (3000 h)
  • Security 48 (4000 h)
  • Security 60 (5000 h)
     

  • Please note that the product range may vary depending on the country.

  • The technical data of the products may vary accordingly with the selection of different options.

  • The engines shown may differ from the current delivery range in your country. Special equipment is depicted here that may be subject to extra charge. Subject to change without notice.